Thomes Canada supplies curved furniture components.
All components are produced in Russia, to customer specifications.
Minimum Orders of 1500 pieces per profile.
Curved parts for chair manufacturing are made from Birch veneer.
Depending on desired chair appearance, veneer grade may vary from C (upholstering quality) up to B (used for lacquering). Similar to the Plywood manufacturing process multiple plies of veneer are cross banded and glued together using interior type of glue with formaldehyde emission class E-1. Chair parts are molded using hot or high frequency press.
CP-0, Curved parts – Blanks
Prefabricated chair parts have straight trimmed edges. They are ready to be cut in the desired forms at your factory. The parts with the following dimensions are available:
Thickness – 10, 12 mm
559 x 559
559 x 509
22 x 22
22 x 20
483 x 483
495 x 483
483 x 610
483 x 635
19 x 19
19.5 x 19
19 x 24
19 x 25
CP-S, Curved parts – Seats
CP-B, Curved parts – Backs
CP-F, Curved parts – Frames
CP-LA, Curved parts – Legs and Arms
CP-BS, Curved parts – Bed Slats
Bed slats are made by gluing together multiple plies of birch veneer using hot press and interior type of glue. All plies have equal long grain direction. This type of construction provides very long lasting and hard spring features of bed slats.
We offer bed slats in the following sizes
|Radius, mm||Length, mm||Width, mm||Thickness, mm|
|3500||480 – 990||35 – 98||8, 11, 12|
|4000||400 – 910||38 – 170||8|
|8000||1100 – 1540||38 – 170||10, 12|
|9000||1190 – 1370||35 – 98||8, 11, 12|
Tolerance: Length: +/- 1 mm, Width: +/- 0.5 mm, Thickness: +/-0.5 mm
Sizes, radius and other features are subject to mill confirmation.
Veneer is selected as follows:
- Face veneer B-grade (small sound knots are acceptable with diameter up to 10 mm)
- Underface plies CP-grade
- Core plies C-grade
- Moisture content 6-10%
- Unfinished (sanded by sand paper, grit 180)
- Urea glue coated (appearance similar to lacquered)